No products in the cart.
Description
The bundle from IOGEAR comes with the 4-Port HDMI KVMP Switch along with two HDMI to DisplayPort adapters, allowing you to directly control up to four computer systems with HDMI or DisplayPort outputs using a single console set. The KVMP switch connects to the computer systems with four supplied KVM cables to deliver audio, video, and input-control signals to your monitor, USB keyboard, USB mouse, and headset. The included adapters let you convert two of the four KVM cables into a DisplayPort connection, so you can use this switch with DisplayPort-enabled products. Aside from these connections, the switch sports two USB 2.0 ports for connecting printers and external storage devices to these systems.
The 4-Port HDMI KVMP switch offers front-panel switch buttons as well as software-based hotkeys to let you quickly switch between your attached systems. It supports HDCP and DynaSync to eliminate delays or changes in video resolution while switching between or booting systems. For easy installation, it is Plug & Play compatible with a wide-variety of operating systems. Moreover, the switch is outfitted with a port that lets you upgrade its firmware to support the latest technologies.
Additional information
| Weight | 5.5 lbs |
|---|---|
| Dimensions | 13.4 × 8.55 × 4 in |
| Max Computer Connections | 4 |
| Port Selection | Hotkeys or front-panel switch button |
| Console Connectors | 1x HDMI female <br>1 x USB Type-A female (keyboard) <br>1 x USB Type-A female (mouse) <br>2 x 3.5 mm stereo female (green, audio) <br>2 x 3.5 mm stereo microphone female (pink, microphone) <br>1 x 4-conductor 3.5 mm (black, flash ROM upgrade) |
| PC Connectors | 4 x HDMI (two DisplayPort with adapters) <br>4 x USB Type-B female <br>4 x 3.5 mm stereo female (green, audio) <br>4 x 3.5 mm stereo female (pink, microphone) |
| Additional Ports | 2 x USB 2.0 Type-A female (one front and one rear) |
| Adapter Specifications | DisplayPort Specification 1.1a for both 1.62 Gbps and 2.7 Gbps <br>DisplayPort link tracking <br>Compliant with DVI 1.0 up to 1.65 Gbps <br>Supports Deep Sleep mode |
| LEDs | 4 x USB peripherals (green) <br>4 x On line (orange) |
| Emulation | USB keyboard and mouse |
| Video Resolution | 1920 x 1200 (1080p) |
| Scan Interval | 1 to 99 seconds |
| Power | 5.3 V, 2.4 A |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Storage Temperature | -4 to 140°F / -20 to 60°C |
| Humidity (Non-Condensing) | 0 to 80% |
| Supported Operating Systems | Windows, Mac, Sun Solaris, and Linux |
| Dimensions (WxHxD) | 10.3 x 1.6 x 3" / 26 x 4.1 x 7.6 cm |
Reviews (4)
4 reviews for IOGEAR 4-Port HDMI KVMP Switch with DisplayPort Adapters Bundle
Only logged in customers who have purchased this product may leave a review.
Related products
$71.47
Belle Zemlak
Verified Purchase
I have had no problems with Pearstone HDMI cables. Since I use a laptop and move around to various second screens (Once you go dual, you never go back!) sometimes the 3 footer is just not long enough. So I just bought a 10 foot Pearstone cable from B&H to handle the problem. I still use this cable for the short runs.
Torrey Skiles
Verified Purchase
I first spoke with B&H Photo tech support regarding using this with Lorex NVR. They thought it should work fine and it did. Quite happy with this KVMP, I have 3 Surveillance recorders hooked to a 24 monitor, mouse and speakers. Saves a lot of space and the expense of a monitor, speakers and microphone for each recorder.
Jayda Stracke
Verified Purchase
I had some questions as to whether this would work with Surveillance Recorders. Support at B&H Photo advised that it should and it does. Saves a lot of space when you have multiple recorders or PCs. I wouldn’t have had room if I had to have 4 monitors, keyboards and mice.
Jana Jast
Verified Purchase
Using the product with a collection of Raspberry Pi. Works very well. Able to switch displays quickly without any problem. USB follows along with no problems. Happy customer!