No products in the cart.
Description
The black ST121UTP VGA Video Extender over Cat5 from StarTech allows you to extend your VGA video signal by up to 500’ (150m) and connect up to 4 displays (2 local and 2 remote) from that single source. The ST121UTP from the ST121 Series is a bundled kit including both a local transmitter and a remote receiver unit, offering a complete solution for scenarios in which remote monitor displays are required.
The local unit features a single VGA input as well as 2 VGA outputs giving you the ability to view and split your source VGA signal to 2 independent displays locally. The VGA video signal is then sent over standard 4 pair Category 5 or better UTP cable to the remote unit which also features 2 additional VGA outputs giving you the freedom to display your VGA source on up to 4 monitors in total.
The included mounting bracket provides versatile mounting options such as a wall, desk, or cabinet.
Additional information
| Weight | 1.8 lbs |
|---|---|
| Dimensions | 9.6 × 7.4 × 3.7 in |
| Port | 1 |
| Cabling Type | Cat 5e UTP or better |
| Connector 1 | Local Unit Connectors:1 x RJ-45 Female1 x VGA (15 pin; high density D-Sub) Male2 x VGA (15 pin; high density D-Sub) Female |
| Connector 2 | Remote Unit Connectors:1 x RJ-45 Female2 x VGA (15 pin; high density D-Sub) Female |
| Maximum Distance | 500' (150 m) |
| Supported Resolutions | 1440 x 900 @ 150.00’ (45.72 m)1280 x 1024 @ 300.00’ (91.44 m)1024 x 768 @ 500’ (152.40 m) |
| Output Voltage | 9 VDC |
| Output Current | 0.6 A |
| Center Tip Polarity | Positive |
| Enclosure Type | Aluminum |
| Dimensions (L x W x H) | 2.40 x 3.30 x 0.80" (6.10 x 8.38 x 2.03 cm) |
Reviews (3)
3 reviews for StarTech ST121UTP VGA Video Extender Over Cat5 (Black)
Only logged in customers who have purchased this product may leave a review.
Related products
$71.47
$18.71
Kamille Champlin
Verified Purchase
I used this item to attach my Camera DVR to my TV. NO power supplies needed is a big plus and I ran about 75ft of Cat6. It works perfectly.
Candice Hagenes
Verified Purchase
Best ever remote hookup for a projector. Run a CAT5 cable from the computer in the back to the projector in the front- instant video. This was a replacement for one purchased 6 years ago, which began distorting colors. New set fixed it right up.
Benjamin Waelchi
Verified Purchase
Replaced a failed Kramer unit with similar performance. Needs power at both ends. Kramer sent power over the CAT5, so only needed power at one end.