No products in the cart.
Description
Designed for select Synology NAS servers, the E10G18-T1 10GbE PCIe Expansion Card from Synology has a single RJ45 port that supports 802.3an 10 Gb/s Ethernet, 802.3bz 2.5 and 5 Gb/s Ethernet, 802.3ab Gigabit Ethernet (1 Gb/s), 802.3u Fast Ethernet (100 Mb/s), and 802.3x Flow Control. It has a low-profile/full-height bracket, a PCIe 3.0 x4 interface, operates in full duplex mode, and can auto-negotiate between 10 Gb/s, 5 Gb/s, 2.5 Gb/s, 1 Gb/s, and 100 Mb/s speeds.
Additional information
| Weight | 0.3 lbs |
|---|---|
| Dimensions | 7 × 5.3 × 1.3 in |
| Networking Ports | 1 x 10Gb Ethernet (RJ45) |
| Host Connection | PCIe 3.0 x4 (Full-Height/Low-Profile Slot) |
| Supported IEEE Standards | 802.3ab, 802.3an, 802.3bz, 802.3u, 802.3x |
| Transfer Rates | Full-Duplex Mode: 10 Gb/s |
| Power Source | Bus Powered |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Storage Temperature | -5 to 140°F / -20 to 60°C |
| Operating Humidity | 5 to 95% |
Reviews (8)
8 reviews for Synology E10G18-T1 10GbE PCIe Expansion Card
Only logged in customers who have purchased this product may leave a review.
Related products
Wired Networking
$80.93
Wired Networking
$7.14
$259.35
Wired Networking
Synology E25G21-F2 Dual 25G Ethernet SFP+ Port PCIe 3.0 Adapter
$240.49
Wired Networking
$20.16
Wired Networking
$142.17
Wired Networking
Ubiquiti Networks 12-Port EdgeRouter 12 Advanced Network Router
$179.99
$271.49
Baylee Kuhlman
Verified Purchase
As described. No hiccups. Given today’s transfer speeds, they should come as stock installs.
Coby Baumbach
Verified Purchase
Decided to get this for my 1821+ since I wanted actual 10-gig support. Works like a charm.
Paige Renner
Verified Purchase
I have an iMac Pro (2017) that has a built-in 10GbE NIC. Adding this card to my Synology 1621+ and running a direct Cat6 between the two (I just need it for myself) gave MASSIVE performance increases. This is an upgrade that was well worth the expense.
Donato Windler
Verified Purchase
I’m getting 250MB/s on a 2.5GB hub and 550MB/s on a 10GB hub with existing CAT6 wiring, which is a substantial improvement from the 100MB/s on standard Gigabit Ethernet. I’m happy with my purchase & installation was a breeze.
Monte Reynolds
Verified Purchase
Been working great so far… I just wish Synology didn’t have vendor lock-in, requiring either their adapter or a select few 3rd party adapters. Because of this, I will likely move on from Synology once the proprietary power supply inevitable fails. If I build my own NAS, I could at least service the thing myself and use a wider variety of hardware. Every single time I either need an upgrade or have a problem, I regret buying a Synology NAS a little bit more.
Mikel Bednar
Verified Purchase
Excelent connection and speed with 10g network, read/write 1000/900 over network
Francesca Hilpert
Verified Purchase
Optimal upgrade, simple installation and immediate operation. Be sure to set up your 10Gb network, cable, 10Gb ports, enable Jumbo frames compatible in MTU 9000 and try to incorporate a ssd cache in your NAS.
Modesto Ebert
Verified Purchase
Popped this card in my DS1621+ Synology and that was that. 10 gigabits and FASTTT transfers. The shipping, packing, and product were all excellent.